The end of the kettle.
QETTLE boiling water taps — true 100°C boiling water, filtered drinking water and normal hot and cold, from one tap. Supplied and fitted by our own CPS Plumbing & Electrical team across Dublin and Leinster.
Choose your tapInstallation
Choose your QETTLE
Pick a range, then choose your finish, spout and boiler tank on the next page. Every tap comes complete with the under-sink boiler, filter and fittings.
What's under the sink
Every QETTLE is a complete system — the tap on top, and a compact boiler and filter in the cupboard below.
Boiler tank — 4 or 7 litre
Insulated stainless tank on a 13 A plug. The 4 litre gives 8 cups of boiling water in one go and suits most families; the 7 litre gives 14 and suits big households and small offices.
Q08 filter
Carbon block cartridge that takes out chlorine, taste and sediment and protects the boiler element from scale. Change it every six months — a two-minute job, and we stock the cartridges.
Two-stage safety
A safety clip stops the boiling side being used at all; with the clip off, the handle has to be pushed and turned together. The spout is insulated so only the tip gets hot.
Optional chiller
Add the QETTLE Chiller for fridge-cold filtered water from the same tap. Fits beside the boiler in a standard 600 mm base unit.
A finish for every kitchen
Brushed stainless steel as standard on the Signature range, or a hard-wearing PVD colour finish. The Original comes in chrome, black or gold.
Fitted by our own team
We're CPS Plumbing & Electrical — the same 5-star Google-rated plumbers behind EcoFilter Ireland. Tick Add CPS installation on any tap and we do the lot:
- Remove your old tap and fit the QETTLE, boiler and filter
- Connect to the cold mains and a 13 A socket, fill and pressure-test
- Commission it, show you how it works and how to change the filter
Dublin and Leinster. We ring to book a date once your order is in. If the sink needs extra plumbing or a socket, we quote for that before we start. Fitting it yourself? Any competent plumber can — the guide and video are in the box.
What our customers saySignature Mixer taps
Matching hot and cold mixers for a second sink or to pair with a Signature Mini — single or dual lever, round or square spout, in all five finishes.
Filters, spares & accessories
Genuine Q08 and Q06 cartridges, replacement boilers, spouts, handles, valves and seals, the chiller and blender valve — all stocked in Dublin.
Questions people ask
Is it really 100°C?
Yes — QETTLE is a true boiling tap, not a 98°C "near-boiling" one, so tea tastes as it should.
What do I need under the sink?
A cold mains feed and a 13 A socket. The 4 litre boiler and filter fit a standard 600 mm base unit with room to spare; mains pressure should be 1.5–5 bar (we fit a pressure reducer if it's higher).
What does it cost to run?
The tank is insulated and only reheats what you use — typically a few cent a day, less than boiling a kettle several times.
Is it safe with children?
The safety clip locks the boiling side out completely. With the clip off it still takes a push-and-turn to get boiling water, and the spout stays cool apart from the tip.
How much upkeep is there?
A filter change every six months and a descale of the boiler once a year. Both are DIY jobs, or we can do them on a service call.
Do you install outside Dublin?
We cover Dublin and Leinster. Further afield we can supply the tap for your own plumber to fit — it's a standard job.