La description
Stuart Turner Showermate Standard Twin Shower Pump – 2.0 bar
Give your shower the pressure it deserves. The Showermate Standard 2.0 bar Twin is a compact, reliable regenerative (peripheral) pump designed for positive head, gravity-fed systems. It boosts both hot and cold supplies to a single shower or a full bathroom, helping eliminate feeble flow and temperature dips.
Why installers rate this pump
- 2.0 bar boost for confident showering performance.
- Positive head – perfect for traditional gravity/open-vented setups with ≥1 L/min natural flow at the outlet.
- Twin impellers – boosts hot & cold in tandem for balanced pressure.
- 15 mm anti-vibration flexi hoses included for quieter, easier installs.
- Continuously rated induction motor built for reliability.
- 3-year manufacturer’s warranty (registration/conditions apply).
Key features
- Pump type: Regenerative / Peripheral; heads: Twin
- Control: Flow switch with ~0.8 L/min sensitivity and short run-on
- Application: Positive head only (open-vented/gravity systems)
- Connections: 4 × 15 mm anti-vibration flexi hoses with isolators
- Typical use: Boost one shower or a bathroom set with existing trickle flow
Performance snapshot
- Maximum (closed-valve) head: ~2.0 bar (≈20 m)
- Typical head @ 9 L/min: ~1.6 bar
- Power: ~420 W (approx. full load)
Is this pump right for you?
This model is ideal if your bathroom already has a small natural flow from gravity (usually from a loft tank). If outlets do not flow by themselves, you likely need a negative head (Universal) shower pump instead.
Need help choosing or fitting?
We install and commission shower pumps across Ireland and can advise on positive vs universal, pipe sizing, and siting to keep things quiet.
Open-vented (gravity) – positive head
15 mm with supplied flexi hoses
Anti-vibration hoses & feet
3 years (manufacturer terms)
What’s in the box
- Showermate Standard 2.0 bar Twin shower pump
- 4 × 15 mm anti-vibration flexi hoses (with isolators on inlets)
- Fittings & documentation
Installation notes
- Mount on a solid base, close to the hot water cylinder/cold feed where possible.
- Use full-bore service valves and keep suction runs short and straight.
- Electrical connection by a qualified person to a suitably protected supply.
- For homes with no natural flow at the outlet, choose a Universal (negative head) model instead.
Need a different option?
If you have ultra-low mains pressure to the cylinder or multiple outlets, ask us about break-tank & booster systems for whole-home performance.
